UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended: December 31, 2024

OR

For the transition period from ___________ to ___________

Commission file number: 001-41173

NexGel, Inc.

(Exact name of registrant as specified in its charter)

Registrant’s telephone number, including area code: (215) 702-8550

Securities registered pursuant to Section 12(b) of the Act:

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a nonaccelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined by Rule 12b-2 of the Exchange Act).

Yes ☐ No ☒

The aggregate market value of the voting stock held by non-affiliates of the registrant as of June 30, 2024, the last business day of the registrant’s second fiscal quarter, was approximately $11,032,723 based on the price at which the registrant last sold common equity.

As of March 27, 2025, the registrant had 7,654,037 shares of common stock outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s definitive proxy statement relating to its 2025 annual meeting of stockholders (the “2025 Proxy Statement”) are incorporated by reference into Part III of this Annual Report on Form 10-K where indicated. The 2025 Proxy Statement will be filed with the U.S. Securities and Exchange Commission within 120 days after the end of the year to which this report relates.

Table of Contents

Forward-Looking Statements

This Annual Report on Form 10-K contains “forward-looking statements,” which include information relating to future events, future financial performance, strategies, expectations, competitive environment and regulation. Words such as “may,” “should,” “could,” “would,” “predict,” “potential,” “continue,” “expect,” “anticipate,” “future,” “intend,” “plan,” “believe,” “estimate,” and similar expressions, as well as statements in future tense, identify forward-looking statements. Forward-looking statements should not be read as a guarantee of future performance or results and may not be accurate indications of when such performance or results will actually be achieved. Forward-looking statements are based on information we have when those statements are made or our management’s good faith belief as of that time with respect to future events and are subject to risks and uncertainties that could cause actual performance or results to differ materially from those expressed in or suggested by the forward-looking statements. Important factors that could cause such differences include, but are not limited to:

For a discussion of these and other risks that relate to our business and investing in shares of our common stock, you should carefully review the risks and uncertainties described elsewhere in this Annual Report on Form 10-K. The forward-looking statements contained in this Annual Report on Form 10-K are expressly qualified in their entirety by this cautionary statement. We do not undertake any obligation to publicly update any forward-looking statement to reflect events or circumstances after the date on which any such statement is made or to reflect the occurrence of unanticipated events.

There may be other factors that may cause our actual results to differ materially from the forward-looking statements, including factors disclosed under the section titled and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in this information statement. You should evaluate all forward-looking statements made in this information statement in the context of these risks and uncertainties.

No assurance can be given that any goal or plan set forth in any forward-looking statement can or will be achieved, and readers are cautioned not to place undue reliance on such statements which speak only as of the date they are made. We do not undertake any obligation to update or release any revisions to any forward-looking statement or to report any events or circumstances after the date of this information statement or to reflect the occurrence of unanticipated events, except as required by law.

Item 1. Business

Our Company

We were incorporated in Delaware on January 13, 2009. We manufacture high water content, electron beam cross-linked, aqueous polymer hydrogels, or gels, used for wound care, medical diagnostics, transdermal drug delivery and cosmetics. We specialize in custom gels by capitalizing on proprietary manufacturing technologies. We have historically served as a contract manufacturer, supplying our gels to third parties who incorporate them into their own products. Beginning in 2020, we created two new lines of business for the company. First, our own line of branded consumer products sold direct to consumers. Second, we expanded into custom and white label opportunities, which focuses on combining our gels with proprietary branded products and white label opportunities. All of our gel products are manufactured using proprietary and non-proprietary mixing, coating and cross-linking technologies. Together, these technologies enable us to produce gels that can satisfy rigid tolerance specifications with respect to a wide range of physical characteristics (e.g., thickness, water content, adherence, absorption, moisture vapor transmission rate [a measure of the passage of water vapor through a substance] and release rate) while maintaining product integrity. Additionally, we have the manufacturing ability to offer broad choices in the selection of liners onto which the gels are coated. Consequently, we and our customers are able to determine tolerances in moisture vapor transmission rate and active ingredient release rates while personalizing color and texture. In May 2023, we formed a joint venture with CG Laboratories, Inc. called CG Converting and Packaging, LLC, which is located in Granbury, Texas and of which we own a 50% interest, allowing us to expand our ability to deliver finished goods to our growing customer base.

Contract Manufacturing Business

As described above, we have historically served as a contract manufacturer, supplying our gels to third parties who incorporate them into their own products. Our hydrogels are currently being marketed in the U.S. and abroad by our customers for the following applications:

We believe our competitive advantage in each of the general hydrogel patch applications described above is that our hydrogel patches are gentler to the skin because we do not use chemical cross-linking agents which are incorporated into other hydrogel patches. Once the gels are manufactured according to a customer’s specifications, the gels are generally shipped to the customer via a contract carrier (e.g., United Parcel Service, Inc.).

Our Facilities

We manufacture our hydrogels at what we believe to be one of only two facilities that can produce state-of-the–art hydrogel transdermal products and we have successfully used over two hundred active ingredients combinations in our hydrogels to date. Our facility consists of 13,500 square feet of manufacturing space, which we currently operate at approximately 15% to 20% capacity. Given the significant unused capacity, we can expand rapidly to meet increased demand, including for our healthcare and consumer product lines as described in more detail below. At full capacity, we estimate our existing facility would produce approximately 1.4 billion square inches of product annually. In addition, we sublease approximately 6,200 square feet of a 12,000 square foot combined office and manufacturing facility in Granbury, Texas, for our joint venture CG Converting and Packaging, LLC (“JV”). Our facilities are subject to stringent FDA compliance requirements. We also believe our hydrogel facility creates a high barrier to entry into our hydrogel and consumer product business.

Consumer Products

Beginning in the third quarter of 2020, we began selling our own branded products using our hydrogel technology on the Amazon marketplace. In 2022 we expanded access to our products by launching our own direct to consumer website, Medagel.com. The products we sell under our MedaGel brand primarily relate to healthcare over-the-counter (“OTC”) remedy solutions, such as blister and pain applications. In December 2023 we added a second consumer product brand when we completed the purchase of the Kenkoderm brand. The Kenkoderm skincare line was originally developed by a dermatologist to provide gentle to the skin products for consumer with psoriasis. In May 2024, we added our third consumer product brand with the purchase of the Silly George brand. Silly George is a beauty brand primarily focused on false eyelashes and other eye related products. We continue to look for additional potential acquisitions as part of our consumer product “roll-up” strategy.

Additionally, we have several more products in our development pipeline. We intend for these products to address various market opportunities including the OTC pharmaceutical drug delivery market, pain management, beauty and cosmetics, sports related applications, cannabinoids (“CBD” and/or “THC”) and general podiatry.

Custom and White Label Opportunities

We are leveraging our hydrogel products and technologies by allowing other OTC brands to incorporate them into their products. We believe our hydrogels, which do not use chemical cross-linking agents and can be made in paraben free formulations, will be attractive to other OTC brands, especially in the beauty and cosmetics industry, and their customers. We believe these white labeling opportunities will increase the markets’ awareness of us as a consumer-friendly and reliable supplier of customizable patches. Additionally, we created a process where customers have the ability to create their own custom hydrogel products. Customers pay a development fee, eliminating our financial risk in the success or failure of the custom product. As opposed to our contract manufacturing business, where we provide bulk sale of roll stock hydrogel to our customers who then use it as one component in their products which they themselves then manufacture, test, market and sell, our custom and white label business will provide customers with a finished product which they will then brand and re-sell.

Medical Devices

We entered into the medical device development sector which a focus on analyzing, creating and developing devices and solutions that reduce skin pain and irritation, improve and maintain skin integrity and provide greater comfort and safety for patients at the site of which a medical device interfaces with the human body.

We conducted proof of concept studies for the development of our first medical device, which we call NEXDrape and have filed for a patent on this device under the Patent Cooperation Treaty which provides patent protection in the nations who are members of the treaty. The NEXDrape device is an incise surgical drape designed for patients with impaired skin. The elderly, diabetics, trauma patients and those with an adhesive sensitivity can have adverse events from the removal of adhesive drapes. Additionally, patients taking certain medications, such as ELIQUIS^® and steroids, may experience impaired skin as well. These groups represent a sizable percentage of the incise surgical drape market, a market we believe to be significant and growing. The incise surgical drape market is currently fragmented with 3M Healthcare being the market leader. Skin tears, infections, rashes, and post-surgical site pain are some of the problems that can occur as a result of the removal of adhesive drapes, and have been reported with other currently available surgical drapes.

We have conducted one animal and two human cadaver proof of concept studies with respect to NEXDrape. As a result of these studies, we believe NEXDrape will represent a gentle to the skin alternative to the current adhesive based standard of care and will provide a unique solution for patients with fragile or compromised skin. Additionally, we believe NEXDrape offers the following benefits over the current incise surgical drape products: (i) no skin irritation; (ii) able to deliver a wide range of antiseptic and antibiotic agents; (iii) eliminates air bubbles; and (iv) prevents dermis removal post-surgery, which reduces the risk of patient infection and discomfort. We intend to file a 510(k) premarket submission with the Food and Drug Administration (“FDA”), which is an application to demonstrate that NEXDrape is as safe and effective (or substantially equivalent to) a legally marketed surgical drape device. There can be no guarantee that the FDA approves our application, if submitted.

We are also in the process of developing a product we call NEXDerm which will be an adhesive tape designed to secure central lines and intravenous tubes and devices to patients before, during and after medical treatment. We believe NEXDerm will be an attractive alternative to Tegaderm™, a 3M Healthcare product. Based on our discussion with medical professionals, Tegaderm™ is often difficult and painful to remove after adhesion, particularly for comprised skin patients. NEXDerm, which will incorporate exclusively licensed technology owned by Noble Fiber, is designed to create a gentle to skin surgical tape impregnated with antimicrobial X-Static^® silver fiber. We believe NEXDerm, if successfully developed, will offer the following advantages over Tegaderm™: (i) ability to easily reposition the adhesive tape; (ii) pain-free removal; (iii) gentle to the skin; and (iv) increased infection prevention. As with NEXDrape, we intend to file a 510(k) premarket submission with the FDA to demonstrate that NEXDerm is as safe and effective (or substantially equivalent to) a legally marketed surgical drape device. There can be no guarantee that the FDA approves our application, if submitted.

Our current intent with any medical devices will not be to commercialize due to the expense required but to potentially prepare them to go to market and to identify and pursue licensing and partnering arrangements with third parties possessing the necessary resources and capabilities to bring the devices to market.

Sales and Marketing

Contract Manufacturing, Consumer Products and Customer and White Label Offerings. We continue to focus on sales and marketing efforts in the United States. We use commission-based, fractional sales personnel to supplement our in-house efforts.

Medical Devices. We do not intend to spend efforts or resources on selling or marketing our medical device business. Our current intent with any medical devices will not be to commercialize due to the expense required but to identify and pursue licensing arrangements with third parties possessing the necessary resources and capabilities to bring the devices to market.

Competition

Contract Manufacturing. To our knowledge, NexGel is one of two manufacturers using electron beam technology for high performance hydrogels for the wound care, cosmetic and drug delivery industries. However, the other manufacture does not currently offer its products to the outside consumer market and, as such, does not currently compete with us directly.

Consumer Products and Medical Devices. As we expand our consumer products and medical device business, we will face a number of competitors. Our competitors include numerous manufacturers; distributors; marketers; online, specialty, mass, and other retailers; and physicians that actively compete for the business of consumers both in the United States and abroad, including companies such as Johnson & Johnson, Pfizer Consumer Healthcare and Procter & Gamble. Most of our competitors have longer operating histories, significantly greater resources, better developed and more innovative sales and distribution channels and platforms, greater name recognition, and larger established customer bases than we do. Therefore, a strategic partnership will be critical to our success in the medical device business. We also face similar challenges with our own consumer branded products and may pursue similar strategic partnerships, though direct to consumer marketing and selling is more feasible.

Custom and White Label Offerings. As our custom and white label offering business will provide customers with a finished product which they will then brand and re-sell, the competition will depend, to a great deal, on the type of product the customer request and will not result in direct competition to us.

Sources and Availability of Raw Materials; Principal Suppliers

In general, raw materials essential to our business are readily available from multiple sources. For reasons of quality assurance, availability, or cost effectiveness, certain components and raw materials are available only from a sole supplier. The principal suppliers for our raw materials are Berry Global, Inc., DeWolf Chemical, Inc., and Univar, Inc. Our policy is to maintain sufficient inventory of components and raw materials so that our production will not be significantly disrupted even if a particular component or material is not available for a period of time.

Because we have no direct control over these suppliers, interruptions or delays in the products and services provided by these parties may be difficult to remedy in a timely fashion. In addition, if such suppliers are unable or unwilling to deliver the necessary components or raw materials, we may be unable to redesign or adapt our technology to work without such components or raw materials or find alternative suppliers or manufacturers. In such events, we could experience interruptions, delays, increased costs, quality control problems, and or be unable to sell the applicable products, all of which could have a significant adverse impact on our revenue.

Other than as discussed above, we believe that, due to the size and scale of production of our suppliers, there should be an adequate supply of components and raw materials from our other suppliers.

Customers

During the year ended December 31, 2024, no customers accounted for 10% of our revenue. During the year ended December 31, 2023 one major customer accounted for approximately 20% of our revenue. We cannot be certain as to this customer’s intentions to use our services during and beyond the fiscal year ended December 31, 2024 since we do not currently have a contract with this customer. However, we have been supplying this customer for more than 15 years and have no reason to anticipate any change. Our contract manufacturing business, including with respect to this customer, operates on a purchase order basis.

Patents, Proprietary Rights and Trademarks

We own or license trademarks covering our company and our products. We filed for a patent on NEXDrape under the Patent Cooperation Treaty which provides patent protection in the nations who are members of the treaty. We also rely upon trade secrets and continuing technological innovations to develop and maintain our competitive position. We also hold certain intellectual property that is not material to our current business and prospects, including patent rights to one patent in Europe, which covers the use of lignin for inhibiting restenosis and thrombosis formation, and coated medical devices where the coating includes lignin. This patent is set to expire in the near future, however we believe the expiration of these patents will not have an adverse impact on our overall business. We hold an exclusive license with right to sub-license from Specialty Pharmaceutical Products, L.L.C. (which was held by our former parent, Adynxx, Inc.) to two issued patents, one in the U.S. and one in Europe, which cover technology relating to a transdermal patch containing transcutol. The transdermal patch is effective to deliver lidocaine to a patient. Neither of these patent rights are material to our current business and prospects. These licensed patent rights are expected to expire in April 2032.

Government Regulation

Product Regulation. Under the Federal Food, Drug and Cosmetic Act, medical devices are classified by the FDA into one of three classes - Class I, Class II or Class III - depending on the degree of risk associated with each medical device and the extent of control needed to ensure safety and effectiveness. While some applications of hydrogels fall under the jurisdiction of the FDA, hydrogels are generally classified as Class I exempt devices and the majority of the hydrogel products that we manufacture are thereby exempt from the FDA filing of any regulatory submissions and/or pre-market notification requirements. To the extent that any FDA regulatory submissions are required, we will be required to file these submissions and maintain all appropriate documentation. With respect to registering the manufacturing facility with the FDA under the Code of Federal Regulations, 21 CFR 820.1, Scope: Part A, it is stated that the regulation does not apply to manufacturers of component parts of finished devices. Currently, hydrogels are sold as component parts to various medical device/cosmetic manufacturers.

Quality Assurance Requirements. The FDA enforces regulations to ensure that the methods used in, and the facilities and controls used for, the manufacture, processing, packing and holding of drugs and medical devices conform with current good manufacturing practice (“cGMP”). The cGMP regulations enforced by the FDA are comprehensive and cover all aspects of manufacturing operations, from receipt of raw materials to finished product distribution, insofar as they bear upon whether drugs meet all the identity, strength, quality and purity characteristics required of them. The cGMP regulations for devices, called the Quality System Regulation, are also comprehensive and cover all aspects of device manufacture, from pre-production design validation to installation and servicing, insofar as they bear upon the safe and effective use of the device and whether the device otherwise meets the requirements of the Federal Food, Drug and Cosmetic Act. To assure compliance requires a continuous commitment of time, money and effort in all operational areas.

The FDA also conducts periodic inspections of drug and device registered facilities to assess their current cGMP status. If the FDA were to find serious non-compliant manufacturing or processing practices during such an inspection, it could take regulatory actions that could adversely affect our business, results of operations, financial condition and cash flows. With respect to domestic establishments, the FDA could initiate product seizures or in some instances require product recalls and seek to enjoin a product’s manufacture and distribution. In certain circumstances, violations could support civil penalties and criminal prosecutions. In addition, if the FDA concludes that a company is not in compliance with cGMP requirements, sanctions may be imposed that include preventing that company from receiving the necessary licenses to export its products and classifying that company as an “unacceptable supplier”, thereby disqualifying that company from selling products to federal agencies.

We conduct audits of our outside manufacturers and believe that we and our suppliers and outside manufacturers are currently in compliance with cGMP requirements. We are currently registered as a device manufacturer and distributor with the FDA and we intend to register as a drug facility with the FDA when we are required to do so.

Environmental Regulation. We are subject to various laws and governmental regulations concerning environmental matters and employee safety and health in the U.S. and other countries. We have made, and continue to make, significant investments to comply with these laws and regulations. We cannot predict the future capital expenditures or operating costs required to comply with environmental laws and regulations. We believe that we are currently compliant with applicable environmental, health and safety requirements in all material respects. However, we cannot assure you that current or future regulatory, governmental, or private action will not have a material adverse effect on our performance, results or financial condition.

In the future, if a loss contingency related to environmental matters, employee safety, health or conditional asset retirement obligations is recognized, we would record a liability for the obligation and it may result in a material impact on net income for the annual or interim period during which the liability is recorded. The investigation and remediation of environmental obligations generally occur over an extended period of time, and therefore we do not know if these events would have a material adverse effect on our financial condition, liquidity, or cash flow, nor can we assure you that such liabilities would not have a material adverse effect on our performance, results or financial condition.

Federal and State Anti-kickback, Self-referral, False Claims and Similar Laws. Our relationships with physicians, hospitals and the marketers of our products are subject to scrutiny under various federal anti-kickback, self-referral, false claims and similar laws, often referred to collectively as healthcare fraud and abuse laws. Healthcare fraud and abuse laws are complex, and even minor, inadvertent violations can give rise to claims that the relevant law has been violated. Certain states have similar fraud and abuse laws, imposing substantial penalties for violations. Any government investigation or a finding of a violation of these laws would likely result in a material adverse effect on the market price of our common stock, as well as our business, financial condition and results of operations. We believe that we are currently compliant with applicable anti-kickback, self-referral, false claims in all material respects.

Research and Development Costs

For the years ended December 31, 2024 and 2023, we incurred approximately $78 thousand and $103 thousand, respectively, in research and development costs. We expect to incur increased costs in the future for our medical device business. Research and development will be an important component in the growth of our business.

Human Capital

As of December 31, 2024, we had 19 full-time employees. Of these employees, five are involved with finance, sales, marketing, and administration and 14 are involved with manufacturing and regulatory matters. Our employees are not represented by a labor union or other collective bargaining groups, and we consider relations with our employees to be good. We currently plan to retain and utilize the services of outside consultants for additional research, testing, regulatory, accounting and tax services, legal compliance, and other services on an as needed basis.

We recognize and value our people as our most important asset in achieving our strategic goals. We are continually working on a human resources strategy that helps drive the right culture, leadership, talent management, performance, reward and recognition, personal development, and ways of working to ensure we achieve our strategic goals while our people benefit from an exceptional experience. Our efforts in creating a working environment that draws out the best in our employees and allows them to fulfil their potential and support our goals focus on the following:

Properties

We maintain a combined corporate office and manufacturing facility in Langhorne, Pennsylvania, where we lease approximately 16,500 square feet of office and manufacturing space which expires on January 31, 2031. In addition, we sublease approximately 6,200 square feet of a 12,000 square foot combined office and manufacturing facility in Granbury, Texas, for our JV. The lease expires in March 2028.

We believe that our facilities are well maintained and are suitable and adequate for our current needs.

Legal Proceedings

From time to time, we may become involved in various lawsuits and legal proceedings which arise in the ordinary course of business. However, litigation is subject to inherent uncertainties, and an adverse result in these or other matters may arise from time to time that may harm our business. We are currently not aware of any such legal proceedings or claims.

There are no material proceedings in which any of our directors, officers or affiliates or any registered or beneficial shareholder of more than 5% of our common stock is an adverse party or has a material interest adverse to our interest.

Contractual Obligations

The Company is a smaller reporting company as defined by Rule 12b-2 of the Securities Exchange Act of 1934, as amended, and is not required to provide the information under this item.

Item 1A. Risk Factors

You should carefully consider the risks described below and elsewhere in this Annual Report on Form 10-K before making an investment decision. Our business, financial condition or results of operations could be materially adversely affected by any of these risks. Our common stock is considered speculative and the trading price of our common stock could decline due to any of these risks, and you may lose all or part of your investment. The following risk factors are not the only risk factors facing the Company. Additional risks and uncertainties not presently known to us or that we currently deem immaterial may also affect our business.

Risks Relating to Our Business

Our future success depends upon market acceptance of our existing and future products.

We believe that our success will depend in part upon the acceptance of our existing and future products by the medical community, hospitals and physicians and other health care providers, third-party payers, and end-users. Such acceptance may depend upon the extent to which the medical community and end-users perceive our products as safer, more effective or cost-competitive than other similar products. Ultimately, for our products to gain general market acceptance, it may also be necessary for us to develop marketing partners for the distribution of our products. There can be no assurance that our products will achieve significant market acceptance on a timely basis, or at all. Failure of some or all of our future products to achieve significant market acceptance could have a material adverse effect on our business, financial condition, and results of operations.

Our suppliers may fail to deliver components and raw materials and parts according to schedules, prices, quality and volumes that are acceptable to us, or we may be unable to manage these components and raw materials effectively.

Our products contain materials and parts purchased globally from many suppliers, including single-source direct suppliers, which exposes us to potential component shortages or delays. Unexpected changes in business conditions, materials pricing, labor issues, wars such as the current conflict in Ukraine, trade policies, natural disasters, health epidemics, trade and shipping disruptions, port congestions and other factors beyond our or our suppliers’ control could also affect these suppliers’ ability to deliver components to us or to remain solvent and operational. Additionally, if our suppliers do not accurately forecast and effectively allocate production or if they are not willing to allocate sufficient production to us, it may reduce our access to components and raw materials, thus requiring us to search for new suppliers. The unavailability of any component or supplier could result in production delays, idle manufacturing facilities, product design changes and loss of access to important technology and tools for producing and supporting our products. Our suppliers may not be willing or able to sustainably meet our timelines or our cost, quality and volume needs, or to do so may cost us more, which may require us to replace them with other sources. While we believe that we will be able to secure additional or alternate sources for most of our components, there is no assurance that we will be able to do so quickly or at all.

As the scale of production of our products, we will also need to accurately forecast, purchase, warehouse and transport components at high volumes to our manufacturing facilities. If we are unable to accurately match the timing and quantities of component purchases to our actual needs or successfully implement automation, inventory management and other systems to accommodate the increased complexity in our supply chain and parts management, we may incur unexpected production disruption, storage, transportation and write-off costs, which may harm our business and operating results.

We rely heavily on the Amazon and Shopify marketplaces for the sales and distribution of our consumer products, and if we are unable to maintain a good relationship with Amazon and/or Shopify or if Amazon and/or Shopify experience disruptions, our business will suffer.

We rely heavily on the Amazon and Shopify marketplaces for the sales and distribution of our consumer products to our end consumers. We believe that we have good relationships with both Amazon and Shopify. However, if we or any of our partners, (or if Amazon and/or Shopify believe we or any of our partners have violated) its terms of service, either Amazon and/or Shopify could limit or terminate its relationship with us. Any limitation or termination of our relationship with Amazon and/or Shopify could materially adversely affect our business, financial condition and our results of operations. Additionally, any prolonged disruption of Amazon’s and/or Shopify’s websites or its or their delivery and distribution of our consumer products could materially adversely impact our business.

We have no contracts in place with our customers in either our contract manufacturing or consumer products business. The absence of such contracts could result in periods during which we must continue to pay costs without revenues.

Our sales are made on a purchase order basis, we do not have contracts with our customers in either our contract manufacturing or consumer products business. Accordingly, our customers are not required to purchase a minimum amount of our products, and we therefore could have periods during which we have no or limited orders for our products, which will make it difficult for us to operate as we will have to continue paying our expenses. We cannot provide assurance that we will be able to timely locate new customers, if at all, when our existing customers are not placing orders. The periods in which we have no or limited purchase orders for our products would have a material adverse effect on our business and financial condition.

We operate in a highly competitive industry.

Competition from other hydrogel manufacturers is intense. There can be no assurance that we can develop products that are more effective or achieve greater market acceptance than competitive products, or that our competitors will not succeed in developing or acquiring products and technologies that are more effective than those being developed by us, that would render our products and technologies less competitive or obsolete.

Our competitors enjoy several competitive advantages over us, including some or all of the following:

Our competitors’ products will compete directly with our products. In addition, our competitors, as well as new market entrants, may develop or acquire new products that will compete directly or indirectly with our products. The presence of this competition in our market may lead to pricing pressure which would make it more difficult to sell our products at a price that will make us profitable or prevent us from selling our products at all. Our failure to compete effectively would have a material and adverse effect on our business, results of operations and financial condition.

As we enter the consumer product business sector to a larger extent, our failure to compete successfully could materially harm our business, financial condition, and operating results.

The business of developing and marketing consumer and personal care products is highly competitive and sensitive to the introduction of new, competitive products, which may rapidly capture a significant share of the applicable market. Our competitors include numerous manufacturers; distributors; marketers; online, specialty, mass, and other retailers; and physicians that actively compete for the business of consumers both in the United States and abroad. Most of our competitors have longer operating histories, significantly greater resources, better-developed and more innovative sales and distribution channels and platforms, greater name recognition, and larger established customer bases than we do. Our present and future competitors may be able to better withstand reductions in prices or other adverse economic or market conditions than we can; develop products that are comparable or superior to those we offer; adapt more quickly or effectively to new technologies, changing regulatory requirements, evolving industry trends and standards, and customer requirements than we can; and/or devote greater resources to the development, promotion, and sale of their products than we do. In addition, because the industry in which we operate is not particularly capital intensive or otherwise subject to high barriers to entry, it is relatively easy for new competitors to emerge that will compete with us. Accordingly, competition may intensify, and we may not be able to compete effectively in our markets. If we are not able to compete successfully in the consumer products sector, our business, financial condition, and operating results would be materially adversely affected.

Our failure to appropriately respond to changing consumer trends, preferences, and demand for new products and product enhancements could materially harm our business, financial condition, and operating results.

Our consumer products business is subject to rapidly changing consumer trends and preferences and product introductions. Our success will depend in part on our ability to anticipate and respond to these changes and introductions, and we may not respond or develop new products or product enhancements in a cost-effective, timely, or commercially appropriate manner. The success of our new product offerings and enhancements depends on a number of factors, including our ability to:

Our failure to accurately predict changes in consumer demand and technological advancements could negatively impact consumer opinion of our products or our business. In addition, if we do not introduce new products or make enhancements to meet the changing needs of our customers in a cost-effective, timely, and commercially appropriate manner, or if our competitors release new products or product enhancements before we do, some of our product offerings could be rendered obsolete, which could cause our market share to decline and negatively impact our business, financial condition, and operating results.

If we fail to further penetrate existing markets, the sales of our consumer products, along with our operating results, could be negatively impacted.

The success of our consumer product business will be to a large extent contingent on our ability to penetrate existing markets, which is subject to numerous factors, many of which are out of our control. Moreover, our growth in existing markets will depend upon our ability to achieve brand awareness. Therefore, we cannot assure you that our general efforts to achieve market penetration in existing markets will be successful. If we are unable to further penetrate existing markets, our business, financial condition, and operating results could materially suffer.

We are subject to governmental regulations in all aspects of our business.

Like other companies in the healthcare industry, we are subject to extensive regulation, investigations and legal action, by national, state and local government agencies in the U.S. Regulatory issues regarding compliance with cGMP by manufacturers of medical devices and consumer products can lead to fines and penalties, product recalls, product shortages, interruptions in production, delays in new product approvals and litigation. In addition, the marketing, pricing and sale of our products are subject to regulation, investigations and legal actions including under the Federal Food, Drug, and Cosmetic Act, federal and state false claims acts, state unfair trade practices acts and consumer protection laws. Scrutiny of health care industry business practices by government agencies and state attorneys general in the U.S., and any resulting investigations and prosecutions, carry risk of significant civil and criminal penalties.

As we continue to develop our medical devices, if we fail to protect our intellectual property in the future, our ability to compete could be negatively affected, which could materially harm our financial condition and operating results.

As we continue to develop our medical devices, such as NEXDrape, our future success and the market for our products will depend to a significant extent upon the goodwill associated with our trademark and tradenames and our ability to protect our proprietary rights in our innovative products and product enhancements. We own, or have licenses to use, the material trademark and trade name rights used in connection with the packaging, marketing, and distribution of our products in the markets where those products are sold. Therefore, trademark and trade name protection are important to our business. Although most of our trademarks are filed in the United States, we may not be successful in asserting trademark or trade name protection or obtaining new trademark registrations.

We will attempt to protect our innovative products and product enhancements under a combination of patents, trademarks, and trade secret laws, confidentiality procedures, and contractual provisions. However, monitoring infringement or misappropriation of intellectual property can be difficult and expensive, and we may not be able to detect every infringement or misappropriation of our proprietary rights or to prevent third parties from infringing upon or misappropriating our proprietary rights or from independently developing non-infringing products that are competitive with, equivalent to, or superior to our products. Even if we do detect infringement or misappropriation of our proprietary rights, litigation to enforce these rights could cause us to divert financial and other resources away from our business operations and may result in the impairment or loss of all or portions of our proprietary rights. As a result, we cannot assure you that we will be able to adequately protect our intellectual property in any jurisdiction. The loss or infringement of our trademarks, tradenames, or other proprietary rights could impair the goodwill associated with our brands and harm our reputation, which could materially harm our business, financial condition, and operating results.

We have limited sales, marketing and distribution capabilities.

We currently have limited sales, marketing and distribution capabilities. We must either develop our own sales, marketing and distribution capabilities, which will be expensive and time-consuming, or make arrangements with third parties to perform these services for us. If we enter into third party arrangements, the third parties may not be capable of successfully selling any of our products. If we decide to market any of our products on our own, we will have to commit significant resources to developing a marketing and sales force and supporting distribution capabilities. If we decide to enter into arrangements with third parties for performance of these services, we may find that they are not available on terms acceptable to us, or at all. If we are not able to establish and maintain successful arrangements with third parties or build our own sales and marketing infrastructure, our business and financial condition will be adversely affected.

Our products risk exposure to product liability claims.

We are exposed to potential product liability risks, which are inherent in the testing, manufacturing and marketing of our products. We may incur significant expense investigating and defending any product liability claims, even if they do not result in liability. Moreover, even if no judgments, fines, damages or liabilities are imposed on us, our reputation could suffer, which could have a material adverse effect on our business, financial condition and results of operations.

We are reliant upon two manufacturers for key ingredients used to manufacture of our hydrogels.

The Dow Chemical Company and the BASF Corporation are the principal manufacturers of the two polymers, polyethylene oxide and polyvinylpyrrolidone, respectively, that we primarily use in the manufacture of hydrogels. Although we have not experienced significant production delays attributable to supply changes, we believe that developing alternative sources of supply for the polymers used to make our current hydrogels would be difficult over a short period of time. Because we have no direct control over its third-party suppliers, interruptions or delays in the products and services provided by these third parties may be difficult to remedy in a timely fashion. In addition, if such suppliers are unable or unwilling to deliver the necessary raw materials or products, we may be unable to redesign or adapt our technology to work without such raw materials or products or find alternative suppliers or manufacturers. In such events, we could experience interruptions, delays, increased costs or quality control problems, which would have a material and adverse effect on our business, results of operations and financial condition.

We have a history of operating losses and may require but have difficulty or be unsuccessful in raising potentially needed capital in the future to continue to operate as a going concern.

While we expect to be cash flow positive by the end of fiscal year 2025, there is no guarantee this will occur. Currently we do not have sufficient cash resources to meet our plans for the next twelve months from the issuance of the financial statements included herein. Our recurring losses from operations, negative cash flows and potential need for additional capital raise substantial doubt about our ability to continue as a going concern. If we do require additional financing to fund our operations, such funds may not be available on acceptable terms, if at all, and such availability will depend on a number of factors, some of which are outside of our control, including general capital markets conditions and investors’ view of our prospects and valuation. In addition, our ability to raise capital in the public capital markets, including through our at-the-market equity offerings, may in the future be limited by, among other things, SEC rules and regulations impacting the eligibility of smaller companies to use Form S-3 for primary offerings of securities. In general, under the “baby shelf” rules if our public float is less than $75 million at the time we file our Annual Report on Form 10-K to update our Form S-3 and our public float remains less than $75, we may not sell more than the equivalent of one-third of our public float during any 12 consecutive months pursuant to the baby shelf rules. Alternative public and private transaction structures may require additional time and cost, may impose operational restrictions on us, and may not be available on attractive terms. Further, investors’ perception of our ability to continue as a going concern may make it more difficult for us to obtain financing, or necessitate that we obtain financing on terms that are more favorable to investors, and could result in the loss of confidence by investors, suppliers and employees. If we do require but are not able to acquire sufficient additional funding or alternative sources of capital to meet our working capital needs, we will have to substantially curtail or discontinue our operations.

Our ability to provide customers with competitive services is dependent on our ability to attract and retain qualified personnel, including our senior management team.

Our ability to grow and provide our customers with competitive services is partially dependent on our ability to attract and retain highly motivated people with the skills necessary to serve our customers. Personnel with the requisite skills or qualifications may be in short supply or generally unavailable. The loss of personnel could impair our ability to perform under certain contracts, which could have a material adverse effect on our consolidated financial position, results of operations, prospects and cash flows.

Changes in accounting standards and subjective assumptions, estimates and judgments by management related to complex accounting matters could significantly affect our financial results or financial condition.

GAAP and related accounting pronouncements, implementation guidelines and interpretations with regard to a wide range of matters that are relevant to our business, including but not limited to revenue recognition, business combinations, impairment of goodwill, indefinite-lived intangible assets and long-lived assets, inventory and equity-based compensation, are highly complex and involve many subjective assumptions, estimates and judgments. Changes in these rules or their interpretation or changes in underlying assumptions, estimates or judgments could significantly change our reported or expected financial performance or financial condition.

Our ability to pursue strategic partnerships may impact our ability to compete in the markets we serve or desire to enter.

We have entered into, and expect to seek to enter into, additional strategic partnerships with other industry participants as part of an effort to expand our business. However, we may be unable to identify attractive strategic partnership candidates or complete such partnerships on terms favorable to us. In addition, if we are unable to successfully implement our partnership strategies or our strategic partners do not fulfill their obligations or otherwise do not prove advantageous to our business, our investments in such partnerships and our anticipated business expansion could be adversely affected.

Achieving our growth objectives may prove unsuccessful. We may be unable to identify future attractive strategic partnerships, which may adversely affect our growth. In addition, our ability to consummate or implement our strategic partnerships may be materially and adversely affected.

Risks Relating to our Common Stock and Capital Structure

An active trading market may not develop or be sustained, and our stock price may fluctuate significantly once we do trade.

Our common stock and certain of our warrants trade on The Nasdaq Capital Market under the symbols “NXGL” and “NXGLW,” respectively.

We cannot predict the prices at which our common stock may trade. The market price of our common stock may fluctuate widely, depending on many factors, some of which may be beyond our control, including:

Furthermore, our business profile and market capitalization may not fit the investment objectives of some of our stockholders and, as a result, these stockholders may sell their shares of our common stock if we are able to list our common stock on The Nasdaq Capital Market. Substantial sales of our common stock may occur, which could cause our stock price to decline. Low trading volume for our stock, which may occur if an active trading market does not develop, among other reasons, would amplify the effect of the above factors on our stock price volatility.

Our failure to meet the continued listing requirements of The Nasdaq Capital Market could result in a delisting of our common stock and warrants.

If we fail to continue to satisfy the continued listing requirements of The Nasdaq Stock Market, LLC such as the corporate governance requirements, the stockholder’s equity requirement or the minimum closing bid price requirement, Nasdaq may take steps to delist our common stock and warrants. Such a delisting or even notification of failure to comply with such requirements would likely have a negative effect on the price of our common stock and warrants and would impair your ability to sell or purchase our common stock and warrants when you wish to do so. In the event of a delisting, we expect that we would take actions to restore our compliance with Nasdaq’s listing requirements, but we can provide no assurance that any such action taken by us would allow our common stock and warrants to become listed again, stabilize the market price or improve the liquidity of our common stock and warrants, prevent our common stock from dropping below the Nasdaq minimum bid price requirement or prevent future non-compliance with Nasdaq’s listing requirements.

We cannot assure you that we will pay dividends on our common stock, and our indebtedness may limit our ability to pay dividends on our common stock.

The timing, declaration, amount and payment of future dividends to stockholders will fall within the discretion of our Board of Directors. Our Board of Directors’ decisions regarding the payment of future dividends will depend on many factors, including our financial condition, earnings, capital requirements of our business and covenants associated with debt obligations, as well as legal requirements, regulatory constraints, industry practice and other factors that our Board of Directors deems relevant. There can be no assurance that we will pay a dividend in the future or continue to pay any dividend if we do commence paying dividends.

The interests of our principal stockholders, officers and directors, who collectively beneficially own approximately 16.3% of our stock, may not coincide with yours and such stockholders will have the ability to control decisions with which you may disagree.

As of March 27, 2025, our principal stockholders, officers and directors beneficially owned approximately 16.3% of our common stock. As a result, our principal stockholders, officers and directors will have the ability to substantially influence matters requiring stockholder approval, including the election of directors and approval of significant corporate transactions. In addition, this concentration of ownership may delay or prevent a change in control of our company and make some future transactions more difficult or impossible without the support of our controlling stockholders. The interests of such stockholders may not coincide with your interests or the interests of other stockholders.

We have identified material weaknesses in connection with our internal control over financial reporting which, if not remediated, could adversely affect our business, reputation and stock price.

Our executive management and Audit Committee have concluded that we have material weaknesses in our internal control over financial reporting. Specifically, we have not designed controls to ensure all accounting journals entries are reviewed and approved. We also identified one individual in our accounting department who has “super user” access and security administration rights to the financial reporting systems. Please see Item 9A - Control and Procedures for more information about identified material weaknesses. A material weakness is a deficiency or combination of deficiencies in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of our annual or interim financial statements will not be prevented or detected on a timely basis.

We are in the process of designing and implementing measures to remediate the material weaknesses described above. Specifically, we expect to implement appropriate controls for accounting journal entry approvals, including the approval of our Chief Financial Officer, and to actively monitor any accounting user with elevated rights or assign another employee outside of an accounting and reporting role with elevated access. While we are designing and implementing measures to remediate the material weaknesses, we cannot predict the success of such measures or the outcome of our assessment of these measures at this time. We can give no assurance that these measures will remediate the weakness in internal control or that additional material weaknesses or significant deficiencies in our internal control over financial reporting will not be identified in the future. Our failure to implement and maintain effective internal control over financial reporting could result in errors in our financial statements that may lead to restatements of our financial statements, cause us to fail to meet our reporting obligations, or prevent fraud. Any such failure could also lead to reputational damage and a decrease in the market price of our stock

If securities or industry analysts do not publish research about our business, or publish negative reports about our business, our share price and trading volume could decline.

The trading market for our common stock, to some extent, may at some point depend on the research and reports that securities or industry analysts publish about our business. We do not have any control over these analysts. If one or more of the analysts elect to cover us and downgrade our shares or lower their opinion of our shares, our share price would likely decline. If one or more of these analysts elect to cover us and subsequently cease coverage of our company or fail to regularly publish reports on us, we could lose visibility in the financial markets, which could cause our share price or trading volume to decline.

Future sales or potential sales of our common stock in the public market could cause our share price to decline.

If the existing holders of our common stock, particularly our directors and officers, sell a large number of shares, they could adversely affect the market price for our common stock. Sales of substantial amounts of our common stock in the public market, or the perception that these sales could occur, could cause the market price of our common stock to decline.

We may issue additional securities in the future upon conversion or exercise of outstanding securities which would result in dilution to our stockholders.

As described elsewhere in this Form 10-K, we have previously issued warrants, restricted stock units, and stock options to fund our operations, pay for services rendered and incentivize our employees and directors. The conversion or exercise of these securities would result in substantial dilution to our stockholders. As of the date of the filing of this Form 10-K, we may be required to issue:

We are an “emerging growth company” and a “smaller reporting company” and may elect to comply with reduced public company reporting requirements applicable to emerging growth companies, and are subject to lesser public company reporting requirements applicable to smaller reporting companies, which could make our common stock less attractive to investors.

We are an “emerging growth company,” as defined in the JOBS Act, and we may take advantage of certain exemptions from various reporting requirements that are applicable to other public companies that are not “emerging growth companies” including reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements, and exemptions from the requirements of holding a nonbinding advisory vote on executive compensation and shareholder approval of any golden parachute payments not previously approved. We may take advantage of these reporting exemptions until we are no longer an “emerging growth company.” We will remain an “emerging growth company” until the earliest of (i) the last day of the fiscal year in which we have total annual gross revenues of $1.07 billion or more; (ii) the fifth anniversary of the Distribution; (iii) the date on which we have issued more than $1.0 billion in nonconvertible debt during the previous three years; or (iv) the date on which we are deemed to be a “large accelerated filer” under the Exchange Act. We cannot predict if investors will find our common stock less attractive because we may rely on these exemptions. In addition, we are a “smaller reporting company” and accordingly are required to provide less public disclosure than larger public companies. If some investors find our common stock less attractive as a result, there may be a less active trading market for our common stock and our stock price may be more volatile.

We will incur costs as a result of operating as a public company, and our management will be required to devote substantial time to new compliance initiatives.

As a public reporting company, and particularly after we are no longer an emerging growth company, we will incur significant legal, accounting and other expenses. The Sarbanes-Oxley Act and rules subsequently implemented by the SEC, have imposed various requirements on public companies, including establishment and maintenance of effective disclosure and financial controls and corporate governance practices. Our management and other personnel will need to devote a substantial amount of time to these compliance initiatives. Moreover, these rules and regulations will entail significant legal and financial compliance costs and will make some activities more time consuming and costly. For example, we expect that these rules and regulations may make it difficult and expensive for us to obtain director and officer liability insurance, and we may be required to accept low policy limits and coverage.

Provisions in our Amended and Restated Certificate of Incorporation and Amended and Restated Bylaws and of Delaware law may prevent or delay an acquisition of our company, which could decrease the trading price of our common stock.

Several provisions of our Amended and Restated Certificate of Incorporation, Amended and Restated Bylaws and Delaware law may discourage, delay or prevent a merger or acquisition that stockholders may consider favorable. These include provisions that:

These and other provisions of our Amended and Restated Certificate of Incorporation, Amended and Restated Bylaws and Delaware law may discourage, delay or prevent certain types of transactions involving an actual or a threatened acquisition or change in control of us, including unsolicited takeover attempts, even though the transaction may offer our stockholders the opportunity to sell their shares of our common stock at a price above the prevailing market price. See “Description of Our Capital Stock Anti-Takeover Effects of Various Provisions of Delaware Law and Our Amended and Restated Articles of Incorporation and Amended and Restated Bylaws” for more information.

Our Amended and Restated Bylaws include a forum selection clause, which could limit our stockholders’ ability to obtain a favorable judicial forum for disputes with us.

Our Amended and Restated Bylaws provide that, unless we consent in writing to the selection of an alternative forum, the sole and exclusive forum for (i) any internal corporate claims within the meaning of the Delaware General Corporation Law (“DGCL”), (ii) any derivative action or proceeding brought on our behalf, (iii) any action asserting a claim of breach of a fiduciary duty owed by any of our directors, officers, or employees to us or to our stockholders, or (iv) any action asserting a claim arising pursuant to any provision of the DGCL, will be a state court located within the State of Delaware (or, if no state court located within the State of Delaware has jurisdiction, the federal court for the District of Delaware). Specifically, the sole and exclusive forum for such legal actions shall be (i) first, the Court of Chancery of the State of Delaware, (ii) second, if the Court of Chancery of the State of Delaware lacks jurisdiction, the Superior Court of the State of Delaware, or (iii) third, if the Superior Court of the State of Delaware lacks jurisdiction, the United States District Court for the District of Delaware, in all cases subject to the court’s having personal jurisdiction over the indispensable parties named as defendants. This exclusive forum provision will apply to state and federal law claims, including claims under the federal securities laws (including actions arising under the Exchange Act or the Securities Act), although our stockholders will not be deemed to have waived our compliance with the federal securities laws and the rules and regulations thereunder. Section 22 of the Securities Act, however, creates concurrent jurisdiction for federal and state courts over all suits brought to enforce any duty or liability created by the Securities Act or the rules and regulations thereunder. Accordingly, there is uncertainty as to whether a court would enforce such a forum selection provision as written in connection with claims arising under federal securities laws. Any person or entity purchasing or otherwise acquiring any interest in shares of our capital stock is deemed to have notice of and consented to the foregoing provisions. This forum selection provision in our bylaws may limit our stockholders’ ability to obtain a favorable judicial forum for disputes with us. It is also possible that, notwithstanding the forum selection clause included in our bylaws, a court could rule that such a provision is inapplicable or unenforceable.

Item 1B. Unresolved Staff Comments

None.

Item 1C. Cybersecurity

Cybersecurity Risk Management and Strategy

We have developed and implemented a cybersecurity risk management program intended to protect the confidentiality, integrity, and availability of our critical systems and information.

There can be no assurance that our cybersecurity risk management program and processes, including our policies, controls or procedures, will be fully implemented, complied with or effective in protecting our systems and information.

Cybersecurity Governance 

Our Board considers cybersecurity risks as part of its risk oversight.

We align with industry-standard cybersecurity frameworks designed to protect the company and customer data from unintentional disclosure, cybersecurity events, and other threats of all severity levels. As part of our alignment with these frameworks we are in the process of implementing a Cybersecurity Incident Response Plan that outlines actions to be taken after identifying a suspected information security breach and the people responsible for managing those actions. Additionally, this plan will outline communication responsibilities during incidents of all severity levels.

Item 2. Properties

We maintain a combined corporate office and manufacturing facility in Langhorne, Pennsylvania, where we lease approximately 16,500 square feet of office and manufacturing space which expires on January 31, 2031. In addition, we sublease approximately 6,200 square feet of a 12,000 square foot combined office and manufacturing facility in Granbury, Texas for our JV. The lease expires in March 2028. We believe that our facilities are well maintained and are suitable and adequate for our current needs.

Item 3. Legal Proceedings

From time to time, we may become involved in lawsuits, investigations and claims that arise in the ordinary course of business. As of the date of this information statement, we are not a party to any litigation whereby the outcome of such litigation, if determined adversely to us, would materially affect our financial position, results of operations or cash flows.

Item 4. Mine Safety Disclosure

Not applicable.

Part II

Item 5. Market for the Registrants Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Market Information

Our common stock is traded on NASDAQ Capital Markets under the symbol “NXGL” and certain warrants to purchase our common stock issued on December 27, 2021 are trade on NASDAQ Capital Markets under the symbol “NXGLW.”

Holders

As of March 27, 2025, there were over 1,047 shareholders of record and 7,654,037 shares of common stock outstanding.

Sales of Unregistered Securities during the Fiscal Year Ended December 31, 2024

The Company did not sell any unregistered securities during the fiscal year ended December 31, 2024.

Issuer Repurchases of Securities during the Fiscal Year Ended December 31, 2024

The Company did not repurchase any of its securities during the fiscal year ended December 31, 2024.

Item 6. [Reserved]

The Company is a smaller reporting company as defined by Rule 12b-2 of the Securities Exchange Act of 1934 and is not required to provide the information under this item.

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following discussion and analysis are intended to help prospective investors understand our business, financial condition, results of operations, liquidity and capital resources. You should read this discussion in conjunction with our consolidated financial statements and related notes thereto included elsewhere in this information statement.

The statements in this discussion regarding industry outlook, expectations regarding our future performance, liquidity and capital resources and other non-historical statements are forward-looking statements. These forward-looking statements are subject to numerous risks and uncertainties, including, but not limited to, the risks and uncertainties described in “Special Note Regarding Forward-Looking Statements.” Actual results may differ materially from those contained in any forward-looking statements.

The NexGel Financial Statements, discussed below, reflect the NexGel financial condition, results of operations, and cash flows. The financial information discussed below and included in this information statement, however, may not necessarily reflect what the NexGel financial condition, results of operations, or cash flows would have been had NexGel been operated as a separate, independent entity during the years presented, or what the NexGel financial condition, results of operations, and cash flows may be in the future.

Overview

We manufacture high water content, electron beam cross-linked, aqueous polymer hydrogels, or gels, used for wound care, medical diagnostics, transdermal drug delivery and cosmetics. We specialize in custom gels by capitalizing on proprietary manufacturing technologies. We have historically served as a contract manufacturer, supplying our gels to third parties who incorporate them into their own products. Beginning in 2020, we created two new lines of business for the company. First, our own line of branded consumer products sold direct to consumers. Second, we expanded into custom and white label opportunities, which focuses on combining our gels with proprietary branded products and white label opportunities. All of our gel products are manufactured using proprietary and non-proprietary mixing, coating and cross-linking technologies. Together, these technologies enable us to produce gels that can satisfy rigid tolerance specifications with respect to a wide range of physical characteristics (e.g., thickness, water content, adherence, absorption, moisture vapor transmission rate [a measure of the passage of water vapor through a substance] and release rate) while maintaining product integrity. Additionally, we have the manufacturing ability to offer broad choices in the selection of liners onto which the gels are coated. Consequently, we and our customers are able to determine tolerances in moisture vapor transmission rate and active ingredient release rates while personalizing color and texture. In May 2023, we formed a joint venture with CG Laboratories, Inc. called CG Converting and Packaging, LLC, which is located in Granbury, Texas and of which we own a 50% interest, allowing us to expand our ability to deliver finished goods to our growing customer base.

We have four distinct lines of business; Contract Manufacturing, Custom & White Label, Consumer Branded Products, and Medical Devices/Other.

Contract Manufacturing

Customers order rolls of gel (“rollstock”). The rollstock is shipped to our customers, which they package into finished goods. Historically, this has been the Company’s primary source of revenue.

Custom & White Label

These products often infuse various ingredients into our base gel to develop unique product offerings to satisfy market demand (e.g. aloe infused into the gel for a beauty mask). The rollstock is converted and packaged into salable units. The finished goods are shipped to the customer, who is ultimately responsible for product distribution. Frequently these products started as development deals, in which the customer paid the company a small fee to develop a specific product. Once completed, the customer places a large order for newly developed product.

Consumer Branded Products

These products are finished goods marketed and sold directly to the customer by the Company through online and retail channels. We are responsible for sales, marketing, and distribution. The products we sell under our MedaGel brand primarily relate to healthcare over-the-counter (“OTC”) remedy solutions, such as blister and pain applications. In December 2023 we added a second consumer product brand when we completed the purchase of the Kenkoderm brand. The Kenkoderm skincare line was originally developed by a dermatologist to provide gentle to the skin products for consumer with psoriasis. In May 2024, we added our third consumer product brand with the purchase of the Silly George brand. Silly George is a beauty brand primarily focused on false eyelashes and other eye related products. We continue to look for additional potential acquisitions as part of our consumer product ‘roll-up” strategy.

Medical Devices/Other

Medical Devices are a hybrid business, combining elements of Custom & White Label and Consumer Branded Products. Medical Devices, which are not yet marketed, are expected to be distributed through strategic partnerships. We will manufacture and possibly convert/package the device while the strategic partner brings the product to market. Small market Medical Devices could be launched by us, but also be offered to a distributor to reach the full scale of the market.

Other includes freight charged to customers who purchase the Company’s branded consumer products through their Spotify stores.

Results of Operations

The following sections discuss and analyze the changes in the significant line items in our statements of operations for the comparison years identified.

Year Ended December 31, 2024 Compared to the Year Ended December 31, 2023 ($ in thousands)

Revenues, net

For the year ended December 31, 2024 revenues were $8,688 and increased by $4,599, or 112.5%, when compared to $4,089 for the year ended December 31, 2023. The increase in our overall revenues was primarily due to sales growth in our branded consumer products, including gross revenue from Silly George of $2,889 for the period of acquisition through December 31, 2024, and an increase in Other Revenues of $238, which mostly consists of shipping revenue on our branded consumer products.

Gross profit (loss)

Our gross profit was $2,748 for the year ended December 31, 2024 compared to a gross profit of $374 for the year ended December 31, 2023 The increase of $2,374 in gross profit recorded for the year ended December 31, 2024, as compared to December 31, 2023, was primarily due to an increase in branded consumer products. Gross profit was approximately 31.6% for the year ended December 31, 2024 compared to a gross profit of 9.1% for the year ended December 31, 2023.

The components of cost of revenues are as follows for the years ended December 31, 2024 and 2023 ($ in thousands):

Cost of revenues increased by $2,225 or 59.9%, to $5,940 for the year ended December 31, 2024, as compared to $3,715 for the year ended December 31, 2023. The increase in cost of revenues is primarily aligned with sales of branded consumer products. As mentioned elsewhere, Silly George was acquired in May 2024 while Kenkoderm was acquired in December 2023.

Selling, general and administrative expenses. The following table highlights selling, general and administrative expenses by type for the years ended December 31, 2024 and 2023 ($ in thousands):

Selling, general and administrative expenses increased by $2,476 or 66.1%, to $6,224 for the year ended December 31, 2024, as compared to $3,748 for the year ended December 31, 2023. The increase in Selling, general and administrative expenses is primarily attributable to the factors described below.

Compensation and benefits increased by $280, or 37.8%, to $1,020 for the year ended December 31, 2024, as compared to $740 for the year ended December 31, 2023. The primary increase in expense, when compared to the prior period, is the increase in contract labor with the inclusion of Silly George.

Share-based compensation increased by $134, or 66.0%, to $337 for the year ended December 31, 2024, as compared to $203 for the year ended December 31, 2023. The increase related to the issuance of stock options and restricted awards to our officers, employees, board of directors, and advisors.

Advertising, marketing, and Amazon fees increased by $1,780, or 404.5%, to $2,220 for the year ended December 31, 2024, as compared to $440 for the year ended December 31, 2023. The increase is due to the increased Amazon selling fees and an increase in advertising and marketing attributable to promoting Kenkoderm and Silly George.

Investor and shareholder services decreased by $153, or 35.9%, to $273 for the year ended December 31, 2024, as compared to $426 for the year ended December 31, 2023. The decrease is due to a net reduction of investor services compared to the prior year period.

Franchise taxes and corporate insurance decreased by $67, or 29.9%, to $157 for the year ended December 31, 2024, as compared to $224 for the year ended December 31, 2023. The vast majority of this decrease pertains to the Company’s reduction in authorized shares, which lowered its franchise tax expense. The Company enjoyed the full benefit of the reduction in authorized shares throughout 2024, as opposed to a partial benefit in 2023.

Professional and consulting fees increased by $312, or 23.3%, to $1,651 for the year ended December 31, 2024, as compared to $1,339 for the year ended December 31, 2023. We continued to incur accounting and consulting fees associated with public company governance requirements and professional services related to branded consumer products. Additionally, consulting fees increased in 2024 with the acquisition of Silly George, which utilizes numerous consultants to assist with marketing, IT, graphic design, and various other services.

Other expenses increased by $160, or 64.0%, to $410 for the year ended December 31, 2024 from $250 for the year ended December 31, 2023. Other Selling, general and administrative expenses generally consist of normal costs associated with our selling efforts and general management, including information technology, travel, training and credit card processing fees. Credit card processing fees in particular increased significantly from 2023 to 2024 with the inclusion of Silly George.

Research and development expenses

Research and development expenses decreased by $25 to $78 for the year ended December 31, 2024 from $103 for the year ended December 31, 2023. Research and development expenses are related to research costs incurred for potential products for existing or new customers.

Liquidity and Capital Resources

Cash Flow (in thousands)

As of December 31, 2024, we had $1,807 thousand of cash and cash equivalents compared to $2,700 thousand of cash and cash equivalents at December 31, 2023. Net cash used in operating activities was $3,867 thousand and $3,236 thousand for the years ended December 31, 2024 and 2023, respectively.

Net cash used in investing activities was $775 thousand and net cash provided by investing activities was $4,456 thousand for the year ended December 31, 2024 and 2023, respectively, consisting of the sales of marketable securities of $68 thousand, offset by purchases of capital equipment of $443 thousand and the investment in the subsidiary Semmens Online of $400 thousand for the year ended December 31, 2024 while the sales of marketable securities of $5,699 thousand, offset by purchases of capital equipment of $696 thousand and the Kenkoderm acquisition of $547 thousand were for the year ended December 31, 2023.

Net cash provided by financing activities for year ended December 31, 2024 was $3,749 thousand which is attributable to the proceeds from rights offering of $3,772 thousand, proceeds from non-controlling interest of $38 thousand, and proceeds from margin line of credit of $345 thousand, offset by principal payments of notes payments of $77 thousand, and change in contingent consideration of $279 thousand made on the operating lease liability, and $50 thousand of principal payment of financing lease liability. Net cash provided by financing activities for year ended December 31, 2023 was $379 thousand which is attributable to the proceeds of equipment notes payable of $315 thousand, proceeds from margin line of credit of $245 thousand, offset by principal payments of notes payments of $6 thousand and payments of $175 thousand made on the operating lease liability.

At December 31, 2024, current assets totaled $5,114 thousand and current liabilities totaled $2,470 thousand, as compared to current assets totaling $5,052 thousand and current liabilities totaling $2,549 thousand at December 31, 2023. As a result, we had working capital of $2,644 thousand at December 31, 2024, compared to a working capital of $2,503 thousand at December 31, 2023. The increase in the working capital as of December 31, 2024 is primarily attributable to the loss from operations of $3,554 thousand and proceeds from rights offering of $3,772 thousand.

We have never declared or paid any cash dividends on our common stock. For the foreseeable future, we anticipate that all available funds and any earnings generated in our business will be used to finance the growth of our business and will not be paid out as dividends to our shareholders. Any future determination related to our dividend policy will be made at the discretion of our Board of Directors and will depend upon, among other factors, our results of operations, financial condition, capital requirements, contractual restrictions, business prospects and other factors our Board of Directors may deem relevant.

Management is exploring new product channel sales in consumer products, such as cosmetics, athletic products, and proprietary medical devices. The Company has increased its focus on sales and developing a sales pipeline for potential customers. This customer base expansion will enable us to provide financial stability for the foreseeable future, expand our current processes, and position us for long-term shareholder value creation.

Our recent capital raise which closed on or about November 20, 2024 provides working capital necessary to continue our strategic objectives (discussed further within Note 13). We intend to maintain and attempt to grow our existing contract manufacturing business. We also plan to continue building and developing our catalogue of consumer products for sale to branding partners and to use our in-house capabilities to create and test market additional branded products. These products will be target marketed and sold online through social media, television and online marketplaces. Furthermore, the Company plans to develop its own proprietary medical devices and explore drug delivery programs for its technology. Additionally, the Company continues to evaluate strategic initiatives (e.g., acquisitions) and additional capital raises through debt or equity may be necessary to achieve these objectives.

We expect to continue incurring losses for the near-term future. Our ability to continue to operate as a going concern in the long term is dependent upon our ability to manage and grow our current products and to ultimately achieve profitable operations. Management may consider various options to raise capital to fund potential acquisitions through equity or debt offerings. There can be no assurances, however, that management will be able to obtain sufficient additional funds, if needed, or that such funds, if available, will be obtained on terms satisfactory to us. The financial statements do not include any adjustments relating to the recoverability and classification of recorded assets and liabilities that might be necessary should we be unable to continue as a going concern.

Additionally, it is reasonably possible that estimates made in the financial statements have been, or will be, materially and adversely impacted in the near term as a result of these conditions, including the recoverability of long-lived assets.

Off Balance Sheet Arrangements

As of December 31, 2024, we had no off-balance sheet arrangements in the nature of guarantee contracts, retained or contingent interests in assets transferred to entities (or similar arrangements serving as credit, liquidity or market risk support to entities for any such assets), or obligations (including contingent obligations) arising out of variable interests in entities providing financing, liquidity, market risk or credit risk support to us, or that engage in leasing, hedging or research and development services with us.

Critical Accounting Policies and Estimates

The preparation of our accompanying consolidated financial statements in accordance with generally accepted accounting principles is based on the selection and application of accounting policies that require us to make significant estimates and assumptions about the effects of matters that are inherently uncertain. We consider the accounting policies discussed below to be critical to the understanding of our Financial Statements. Actual results could differ from our estimates and assumptions, and any such differences could be material to our Financial Statements.

Share-based compensation – We utilize share-based compensation in the form of incentive stock options. The fair values of incentive stock option award grants are estimated as of the date of grant using a Black-Scholes option valuation model. Compensation expense is recognized in the statements of operations on a straight-line basis over the requisite service period, which is generally the vesting period required to obtain full vesting. The expected term of the awards granted is estimated using the simplified method which computes the expected term as the sum of the award’s vesting term plus the original contractual term divided by two.

Warrant Liability – Warrants to purchase common stock were issued in connection with equity financing raises which occurred during 2019 through 2021. The fair values of the warrants are estimated as of the date of issuance and again at each year end using a Black-Scholes option valuation model. At issuance, the fair value of the warrant is recognized as an equity issuance cost within additional paid-in-capital. Fair value adjustments to the warrant liability are recognized in other income (expense) in the statements of operations. The expected term of the awards granted are based on either the three-year or five-year contractual expiration date.

Black Scholes Inputs - The fair value of each stock option award and warrant issued was estimated on the date of grant using a Black-Scholes option-valuation model, which requires management to make certain assumptions regarding: (i) fair value of the common stock that underlies the stock option; (ii) the expected volatility in the market price of our common stock; (iii) dividend yield; (iv) risk-free interest rates; and (iv) the period of time employees are expected to hold the award prior to exercise (referred to as the expected term). Under the Black-Scholes option-valuation model, entities typically estimate the expected volatility based on historical volatilities of the entity’s own common stock. Based on the lack of historical data of volatility for the Company’s common stock, the Company based its estimate of expected volatility on a weighted average of the historical volatility of comparable public companies that manufacture similar products and are similar in size, stage of life cycle, and financial leverage. The fair value of the common stock that underlies the stock option is estimated by the Company considering the price of the most recent issuance of the Company’s common stock. The dividend yield is based upon the assumption that the Company will not declare a dividend over the life of the options. The risk-free interest rate is based on the U.S. Treasury yield curve in effect at the time of grant for bonds with maturities consistent with the expected term of the related award.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

Not required.

Item 8. Financial Statements and Supplementary Data

FINANCIAL STATEMENTS - TABLE OF CONTENTS

For the Years Ended December 31, 2024 and 2023

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of

NexGel, Inc.

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of NexGel, Inc. (the “Company”) as of December 31, 2024 and 2023, and the related consolidated statements of operations, stockholders’ equity and cash flows for each of the years in the two year period ended December 31, 2024, and the related notes (collectively referred to as the financial statements). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2024 and 2023, and the results of its operations and its cash flows for each of the years in the two year period ended December 31, 2024, in conformity with accounting principles generally accepted in the United States of America.

Going Concern

The accompanying financial statements have been prepared assuming that the Company will continue as a going concern. As discussed in Note 2 to the financial statements, the Company has recurring losses from operations and negative cash flows from operating activities, which raises substantial doubt about its ability to continue as a going concern. Management’s plans in regard to these matters are also described in Note 2. The financial statements do not include any adjustments that might result from the outcome of this uncertainty.

Basis for Opinion

These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits, we are required to obtain an understanding of internal control over financial reporting, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

/s/ Turner, Stone & Company, L.L.P.

We have served as the Company’s auditor since 2019.

Dallas, Texas

March 27, 2025

NEXGEL, INC

CONSOLIDATED BALANCE SHEETS

(in thousands, except share and per share data)

The accompanying notes are an integral part of these consolidated financial statements.

NEXGEL, INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

(in thousands, except share and per share data)

The accompanying notes are an integral part of these consolidated financial statements.

NEXGEL, INC.

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

Years Ended December 31, 2024 and 2023

(in thousands, except share data)

The accompanying notes are an integral part of these consolidated financial statements.

NEXGEL, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

(in thousands)

The accompanying notes are an integral part of these consolidated financial statements.

NEXGEL, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(in thousands, except share and per share data)